See the platform. Not just the pitch.
Live dashboards, automated reporting from the hour to the month, and alerts that catch waste and faults before they show up on an invoice. This is the same platform enterprise energy teams open every morning.
One screen, every site, right now.
The live dashboard brings electricity, gas and water consumption, alert status and site health into a single enterprise view — refreshed continuously as readings arrive over LoRaWAN.
- Reporting normally141
- Active anomaly3
- Sensor offline2
- Under maintenance2
The same data, at every cadence your business needs.
Switch between reporting intervals below — every view is generated automatically from the same governed data model, with no manual spreadsheet work required.
Interval-level visibility for live operations.
Shift managers and control-room teams use hourly reporting to spot deviations while they are still cheap to fix — before a spike becomes a wasted day of production.
How data reaches this reportSee the long-term trend, not just the last reading.
Trend analysis normalises consumption against a rolling baseline, so energy teams can prove whether an efficiency programme is working — or whether last month's improvement was seasonal noise.
- Rolling baseline comparison across any date range
- Automatic weather and production normalisation
- Exportable evidence for ISO 50001 management review
Electricity, gas and water — side by side, by site.
Continuous flow detected between 22:00–05:00, well above the expected overnight baseline of 6–9 L/hr — a typical signature of an undetected pipe leak.
The platform watches for the pattern that matters most in leak detection: consumption that never returns to zero. Overnight and non-production-hour flow is compared automatically against each site's own baseline.
Load at 14:00 deviated 3.1 standard deviations from the trained baseline for this asset and time slot — flagged automatically for engineer review.
A statistical model learns the normal operating envelope for every meter, then flags deviations that a fixed threshold alone would miss — surfacing developing faults before they cause downtime.
Role-based dashboards for every part of the business.
Facility managers, energy managers and executives each get a dashboard scoped to what they need to act on — built from the same underlying data model.
Real-time status per meter, sensor battery health, and instant fault visibility for a single site.
Cross-site comparison, consumption vs target, and ISO 50001-ready reporting exports.
Consolidated cost, carbon and efficiency KPIs across the entire estate in one board-ready view.
Issues reach the right person, automatically.
Alerts route by rule, site and severity — to email, SMS or a control-room dashboard — so a suspected leak or an offline sensor is never sitting unnoticed in a report nobody opened.
- Configurable thresholds per meter, site or business unit
- Escalation paths for unacknowledged alerts
- Full audit trail of every alert raised and resolved
Suspected water leak — Site C, Utility Room 2
2 min agoContinuous night-flow detected outside expected baseline of 6–9 L/hr.
Electricity demand spike — Site A, Line 4
18 min agoConsumption 22% above rolling 4-week average for this time slot.
Gas meter offline — Site D
41 min agoNo pulse received for 35 minutes; gateway signal strength nominal.
Anomaly resolved — Site B, Compressor Bay
1 hr agoLoad returned to baseline after maintenance action logged by site engineer.
The same data model, in whichever shape helps you decide.
Charts, KPI cards and dashboards on this page render from mock data for demonstration purposes. In a live deployment, every visual reflects real meter readings for your estate.
Watch the platform in action.
This panel is reserved for a real product demonstration recording — it has been built so a video can be embedded here without any redesign of the page.
Platform Demonstration — Placeholder
Replace this panel with an embedded product demo video
From raw data to reduced waste, faster fault-finding and measurable efficiency.
Reducing waste
Energy teams use hourly and daily reporting to catch consumption that has drifted from target — idle equipment left running, compressed air leaks, out-of-hours HVAC — and act the same day rather than discovering it at month-end.
Identifying issues earlier
Anomaly and leak detection surface developing faults — a failing compressor, a leaking pipe, a miscalibrated meter — while they are still a maintenance ticket, not an unplanned outage or a six-figure water bill.
Improving operational efficiency
Weekly and monthly trend reporting gives operations and finance a shared, auditable view of what efficiency initiatives actually delivered — feeding directly into ISO 50001 management reviews and sustainability reporting.
A typical enterprise workflow
A facility manager opens the live dashboard each morning and clears any overnight alerts. The energy manager reviews the daily and weekly reports to check every site against target, escalating anomalies for investigation. At month-end, the platform generates the monthly report automatically — feeding directly into ISO 50001 management review and board-level cost and carbon reporting, with no manual data consolidation required.
See the full data architecturePlatform questions, answered
Want to see it running against your own sites? Book a live walkthrough with an engineer.
All FAQsCan this reporting platform be demonstrated with our own data?
Yes. During an enterprise demo we can load an anonymised or live extract from your existing meters into the same dashboards shown on this page, so your team evaluates the platform against your actual estate.
How often is data refreshed on the live dashboard?
Sensor readings typically arrive every few minutes via LoRaWAN. Dashboards update in near real time, while hourly, daily, weekly and monthly reports are automatically aggregated and versioned for audit purposes.
What triggers an automated alert?
Alerts are triggered by rule-based thresholds (fixed limits, percentage deviation from baseline), statistical anomaly detection, and pattern-based leak detection — each configurable per meter, site or business unit.
Can dashboards be tailored to different roles?
Yes. Facility managers typically see meter-level detail, energy teams see site and portfolio comparisons, and executives see consolidated KPI and cost dashboards — all drawing from the same underlying data model.
Is the demonstration video on this page a real product recording?
The video panel on this page is a placeholder frame reserved for a real product demonstration. It has been built so the final recording can be dropped in without any redesign of the page.
See this platform running against your own estate.
Book a live walkthrough and we will load a real or anonymised extract from your sites into these exact dashboards.
Choose how you would like to engage our team.
Every route below reaches our UK and EU enterprise engineers directly. Pick the one that fits where you are — no obligation, response within one working day.
Common questions
An engineer reviews your metering estate and site plans, then returns a scoped monitoring proposal — typically within one working day of the initial call. There is no cost or obligation.
Send an enquiry
Tell us about your estate and we will route you to the right engineer.
